Boho Crochet Wall Hanging Pattern
A measured textured wall panel with straight foundation, alternating solid and open rows, controlled fringe, and secure attachment to a wooden dowel.

Make a textured wall panel with a straight top, bands of open stitches and a tapered lower section ending in a flat 20-stitch edge. The main image offers color and styling inspiration; its geometric colorwork is not included in this single-panel pattern. Use one color to see the texture clearly.
Materials and supplies
- Worsted-weight cotton or another yarn that holds the blocked shape you prefer
- 4-5.5 mm hook
- Flexible tape measure
- Blocking pins and mats
- Yarn needle and sharp scissors
- A smooth wooden dowel at least 4 cm wider than your blocked panel and strong hanging cord
Choose the dowel after measuring
Wash and dry a swatch as the yarn label directs. Divide 50 by your stitches per cm to estimate the top width; measure the finished blocked edge before choosing the rod. Leave about 2 cm free at each end for the cord. The 68-row panel includes different textures, so its length depends on your actual row gauge. There is no verified sample yardage: estimate the panel from a weighed swatch and reserve extra yarn for sewing and fringe.
Crochet terms used
US terms: ch chain, sc single crochet, sc2tog single crochet two together. For sc2tog, insert into the next stitch and pull up a loop, repeat in the following stitch, yarn over and pull through all three loops. This consumes two stitches and makes one. Every turning ch 1 is excluded from the count.
Textured wall panel
Chain 51.
- Row 1: Sc in the second chain from the hook and across. (50)
- Rows 2-5: Ch 1, turn, sc in every stitch. (50)
- Row 6: Ch 1, turn, sc in the first stitch; repeat (ch 1, skip the next stitch, sc in the next stitch) 24 times; sc in the last stitch. (50 stitch positions)
- Row 7: Ch 1, turn; work one sc into each sc and each ch-1 space. (50)
- Rows 8-10: Ch 1, turn, sc in every stitch. (50)
- Repeat rows 6-10 four additional times, ending at row 30. Work five plain sc rows, rows 31-35, keeping 50 stitches.
Shape the flat-ended taper
Row 36, decrease row: Ch 1, turn, sc in the first stitch, sc2tog, sc to the final 3 stitches, sc2tog, sc in the last stitch. (48) Row 37, even row: Ch 1, turn, sc across. (48)
Repeat that decrease/even pair 14 more times for 15 pairs total. Each decrease removes two stitches. The fifteenth decrease row is row 64, ending with 20 stitches; row 65 keeps 20. Work rows 66-68 even at 20 and fasten off. Block the actual outline: straight top, tapered sides, flat lower edge. Do not stretch it square or pull it into a point.
| Checkpoint | Stitches |
|---|---|
| Row 35, before taper | 50 |
| Row 36, first decrease | 48 |
| Row 44, fifth decrease | 40 |
| Row 54, tenth decrease | 30 |
| Row 64, fifteenth decrease | 20 |
| Rows 65-68 | 20 |
Dowel and fringe
After blocking and drying, place the straight foundation edge below the dowel. Sew a loop through a secure foundation position and around the rod at each of the 50 positions. Distribute the fabric evenly without stretching. The side row ends stay free. Secure and weave both sewing tails into the panel.
For fringe, cut 40 strands: two strands for each of the 20 bottom stitches. Each strand needs twice the desired hanging length plus an allowance for the knot and trimming. For example, start with 28 cm strands for roughly 12 cm fringe and test one knot before cutting the rest; thick yarn consumes more length.
Fold two strands together in half. Pull their folded loop through one bottom stitch, pass all four loose ends through that loop and snug the knot gently. Repeat once per bottom stitch. Hang the panel before trimming; keep the flat lower edge visible or trim the fringe itself into a shallow V. A V-shaped fringe does not change the crocheted panel's flat-ended taper.
Tie a hanging cord firmly around both exposed dowel ends, secure each with a double knot and check that it cannot slip off. Use wall hardware appropriate to the completed piece.
Tips & troubleshooting
Count spaces as well as stitches
The open row has 24 ch-1 spaces and 26 sc, giving 50 stitch positions. In the following solid row, work one sc into each space and each sc; do not crochet into both a space and the chain above it.
Check the taper at each pair of rows
Each decrease row removes two stitches; its following even row preserves that count. Record each pair so the fifteenth decrease row ends at 20 stitches, with the 20-stitch bottom centered beneath the original panel.
Fit the panel to the dowel
Measure the blocked top edge against the dowel before attaching it. Leave room at both ends for the hanging cord; do not bunch an overly wide panel onto the rod and expect it to hang flat.
Frequently Asked Questions
Which edge attaches to the dowel?
The straight foundation edge at the top of the panel attaches to the dowel. The side row ends stay free, and the tapered lower edge carries the fringe.
When should I trim the fringe?
Block and dry the panel first, attach the fringe, then hang the piece before its final trim. Support the strands without stretching them while cutting the lower outline.
May I sell the finished item?
Small-scale sales of finished items from this pattern are allowed with credit to Boho Crochet Wall Hanging Pattern. Do not copy, sell, or republish the written instructions or site images.
Keep exploring
To build on Boho Crochet Wall Hanging Pattern, continue with Boho Crochet Plant Hanger Pattern, Crochet Coasters and Table Decor Set, Free Crochet Blanket Patterns for Beginners (Granny Square). For a broader route through the site, use the Ultimate Free Crochet Pattern Library.
Essential crochet guides
Maker notes
Questions or finished-project notes?
Share what helped, ask about a step, or leave a thoughtful note for the next maker.




Loading maker notes...